Belt Cleaning Brush Pad
FUSION
Belt Cleaning Brush Pad
- Easy to install
- Deburs while it cleans
The Belt Cleaning Brush Pad offers a unique solution to cleaning belts with a profiled surface including those with sidewalls and cleats.
Why Is Almex Different?
Clean belts with a profile.
Features and Product Information
Features
- Works very well on cleaning products that are profiled and require deburring
- A flat pad with 2” fingers which can be adhered to a shaft and mounted in the pulley area
- Back surface already prepared for easy installation
- Works in belt cleaning applications such as chip belts in pulp and paper and cleaning cement blocks
- Can be mounted on any existing pulley
Product Information
Properties:
Elastomer: NR 70% SBR 30% -SBR
Tensile Strength: 19 Mpa-15 Mpa
Elongation at Break: 550%-530%
Density: 1.1 g / cm3
Hardness: 65 Shore A - 55 Shore A
Length (in) : 29.3
Length (mm) : 747
Width (in) : 11.75
Width (mm) : 300
Height (in) : 2
Height (mm) : 50
Specifications
| Product Code | Width (Metric/Imperial) | Length (Metric/Imperial) | Height (Metric/Imperial) |
|---|---|---|---|
| CCR-RBP-001 | 300MM / 11.75" | 747MM / 29.3" | 50MM / 2" |
Accessories
Belt Cutting Saw HBSC-001
Belt Cutting Saw HBSC-001
Fabric Belt Step Splice Kit
Fabric Belt Step Splice Kit
Fabric Belt Splicing Took Kit
Fabric Belt Splicing Took Kit
HC1 Vulcanizing Splice Cement
HC1 Vulcanizing Splice Cement
RC Fusion Clean Solvent
RC Fusion Clean Solvent
Related Items
