- Non-destructive scanning
- Almex Site Technician performs a scan
- Operational mitigation - detect issues early
The EMSYS BeltGard Systems uses MFL technology to provide an advanced non-destructive belt scanning system that can determine cable damage, splice layout, splice deterioration and corrosion in any steel cable belting.
BeltGard Systems uses rare earth magnets that magnetize the steel cables within the conveyor belt and the sensor head and then a high-speed processor reads the magnetic flux from the damaged/cut/corroded cables.
BeltGard works for any steel cable belt manufacturer and any belt thickness or belt speed. The system provides alerts based on various tolerance points set to provide a Non-Destructive Test (NDT) solution and early warning of any potential belt failures.
BeltGard 1.O is an on-site, scan-on-demand service run by Almex technician. Our Almex Staff will come on site and run a scan on the belt and provide a detailed report of the findings.
BeltGard 1.0 is an ideal introductory scanning solution for assessing belt damage and potential risk of future issues.
- On-demand automated reporting of all events seen within the conveyor system
- Detailed Scan report