- Non-destructive scanning
- One-Time or Continuous remote operation options
- Operational mitigration - reduce downtime
The Almex BELTGARD System is an advanced non-destructive belt scanning system that can determine damage, splice layout, splice deterioration and corrosion in any steel cable belting.
Early detection and repair can decrease down-time and costly extensive repairs or belt replacement and potentially avoid catastrophic events.
The BELTGARD system is comprised of rare earth magnets that magnetize the steel cables within the conveyor belt as we read magnetic flux from the damaged/cut/corroded cables. BELTGARD works universally for any Steel cable belt manufacturer and any belt thickness or belt speed. The system will provide alerts as various tolerance points set to provide a NDT solution and early warning of any potential belt failures.
Setup is Fast and easy setup for portable onsite scanning services. The BELTGARD system can run and operate as the mine continues its normal production schedule.
For permanent monitoring, Almex Global Services staff can permanently mount the equipment and remotely monitor the conveyor belt anywhere in the world through our Global Services platform.
The Almex BELTGARD System is an advanced non-destructive belt scanning system that can determine damage, splice layout, splice deterioration and corrosion in any steel cable belting.
Features
Options:
- Diagnostic Service inspections onsite
- Premanent install and monitoring by Almex Global Services staff remotely for any location