Almex Group | HC1 Vulcanizing Splice Cement

HC1 Vulcanizing Splice Cement

Builds tack for splicing
For Cured and Uncured Rubber
For Fabric and Steel Cable Belts

If you are looking for Operating Manuals or Safety Data Sheets, please request them on our Resources page.

HC1 is a one-part cement for vulcanized belt splicing. It is designed for use as a tackifying agent for cured and uncured rubber materials.

Why Is Almex Different?

Build tack for hot splicing
Works with most belts
Good belt penetration
For Cured and Uncured Rubber

Features and Product Information

Features

Builds additional tack for uncured splice materials in preparation for a conveyor belt splice
Brushable consistency for ease of application
Good penetration into the splice materials
Can be used with a variety of adhesive systems such as Fabric Primer and Steel Cord Primer
Use for Natural Rubber (NR), Polyisoprene (IR), Styrene-Butadine (SBR), Polybutadiene (BR), Polychloroprene i.e. Neoprene (CR) rubber belt splices
Flammable

Product Information

Properties:

Rubber Colour: Black
Base Polymer: NR/SBR Rubber
Solids (wt.): 15-20 %
Formula: Naphtha (60%), Heptane (25%), Rubber (15%)
Calculated Coverage:
700 gr (1.54 Lbs.) - 2.7 M² (29 ft²)
3 kg (6.6 Lbs.) - 13.4 M² (144 ft²)
14.5 kg (31.9 Lbs.) – 67 M² (721 ft²)
170 kg (374 Lbs.) - 670 M² (7212 ft²)
Flash Point: 7 °C (45 °F)
Shelf Life: 6 Months at 21º C (70º F) or 12 Months at 10º C (50º F).

Specifications

Product Code	Weight (Metric/Imperial)
AA-HC1-Q	700 gr / 1.54 Lbs.
AA-HC1-G	3 kg / 6.6 Lbs.
AA-HC1-5G	14.5 kg / 31.9 Lbs.
AA-HC1-55G	170 kg / 374 Lbs.

Accessories

Porcupine Roller

Fabric Belt Splicing Tool Kit

Flat White Bristle Cement Brush - 2"

Finger Splice Skiver Kit