MSDS can now be requested via our website. Place a request now.
Fusion CDS ceramic lagging provides an immediate, cost effective solution to conveyor belt drive problems and additional long term benefits to the system.
Utilizing aircraft grade aluminum cores in a flexible wing design and fastened with self-tapping corrosion resistant bolts. PrimeDrive is the most unique lagging offering in years. It completely eliminates the grinding and cutting required to remove lagging that has corroded after months of use. It can be easily fastened with a pneumatic drill and socket driver, avoiding the use of burn permits and the risk of fire or explosion. Change-outs can be accomplished in 2-3 hours because the hole pattern already exists!
FusionLagg RMD (Red Mini Diamond) is a small profile pulley lagging, ideal for driven pulleys with medium to low tensions and belt ratings. Press cured, FusionLagg RMD will provide long life and offers a good coefficient of friction in wet or muddy installations. Fusion RMD also features the Fusion bonding layer technology for superior adhesion to the pulley surface. FusionLagg RMD… the choice for wet applications!
FusionLagg WMD is a small profile pulley lagging, ideal for driven pulleys with medium to low tension belt ratings. Press cured, FusionLagg WMD is compounded specifically for use in food, tobacco, or pharmaceutical applications and features a bonding layer technology. FusionLagg WMD… the choice for food handling applications!
FusionLagg BMD is a small diamond pulley lagging, ideal for driven pulleys with medium tensions and belt ratings. Press cured using high temperature and pressure FusionLagg is proven to give significantly longer life than steam cured pulleys and will not prematurely harden causing slippage like steam cured. Fusionlagg BMD features the Fusion bonding layer technology which provides a superior bond to the pulley face.
The unique profile design and superior quality rubber compound places Fusion URDS lagging at the forefront of conveyor drive pulley lagging development. The profile pattern provides effective surface contact with the conveyor belt. At the same time the open area or spacing between the profiles effectively removes product fines, moisture and water when present on the system.
The Belt Patch Kit (BK1-001) is the best solution for minor repairs of conveyor belt damage. It comes complete with the necessary tools, adhesives, solvents and materials. Repaired belts can often be put back into service within 6-8 hours.
The Belt Patch Kit (BRK-002) is the best solution for significant repairs of conveyor belt damage. It comes complete with the tools, adhesives, solvents and materials to undertake even large repairs. Repairs can often last years or even for the remaining of the belt life.
The Cold Fusion Splice Kit (CSK-001) is the most comprehensive kit available for those companies which want to undertake their own belt splicing without the investment in hot vulcanizing equipment. When the proper techniques are used cold splices can often achieve stronger splices than hot vulcanizing. After the initial cost for the tools, subsequent splices will cost about the same as mechanical fasteners.
CRF is ideal cement when bonding rubber to rubber. In repeated tests CRF provided bond strengths 20% to 30% higher than all other competitive products. CRF has the longest pot life of all the Fusion family, over 4 hours, making it ideal for fabrication and manufacturing applications
WCRF formulated for use with food grade conveyor belt and rubber to metal bonding. WCRF provides bond strengths that exceed competitive products and shares CRF’s long pot life characteristics.
ECRF represents a new era in cements which offers many advantages for quick and environment-friendly cold bonding, such as no chlorinated hydrocarbons and high initial and permanent adhesion.
ECRF represents a new era in cements which offers many advantages for quick and environment-friendly cold bonding, such as no chlorinated hydrocarbons and high initial and permanent adhesion.
CPVC is the finest PVC cement on the market today. By utilizing a special solvent base, the surface preparation is eliminated. By not requiring any buffing, productivity increases when used in high volume fabrication and manufacturing applications. CPVC has exceptional moisture and oil resistance and good flexibility. CPVC’s strong initial bond strength allows conveyors to be returned to service in only 4-6 hours. In fabrication environment CPVC allows for faster throughput because the belt can be moved within minutes without fear of dislodging the cleat or splice.
Fusion Rubber to Metal Primer CP-GRM is actually an interface between the rubber and metal and so has to offer high bond strengths between both surfaces. CP-GRM has proven to be the ideal product for priming metal surfaces when bonding rubber in high tension applications such as pulley lagging. Unlike zinc based primers, which are very prone to settling, CP-GRM utilizes polymers and organic compounds to achieve a high strength bond.
Fusion Clean Solvent has been specially formulated to be the aggressive solvent required for the rubber fabrication and conveyor splicing industry. Fusion Clean Solvent is a blend of cyclohexane and xylene which are both aromatic distillates instead of petroleum distillates like toluene. This very pure solvent will not leave behind an oil residue like some toluene which can inhibit or prevent sufficient adhesion to ensure success. Each splice or fabrication project is only as good as the solvent!
Fusion CFTU is a high quality trowelable urethane ideal for the repair of electrometric components. As a thixotropic mixture CFTU can be used for repairs in the most difficult of conditions including inverted. Once repairs in the most difficult of conditions including inverted. Once applied, the incredible wear properties will ensure a long lasting repair.
Fusion cover rubber has excellent abrasion resistance and UV inhibitors to provide durable repairs to conveyor belts or for cold bond splices, and with a bonding layer it provides exceptional adhesion. It has a higher abrasion index than most belt covers.
Fusion repair patches and repair strips offer a balance between an economical and durable repair for conveyor belt damage. These repairs won’t damage the conveyor belt like some mechanical fasteners and will allow the belt to be back in service in a matter of hours. The repair may very well last as long as the original belt remains in service.
Fusion T Bar scrapers offer an excellent balance in cost and wear performance. Compounded out of predominantly natural rubber, Fusion T Bars offer long wear life and utilize an economical and simple tension system. Fusion T Bars can also fit into many competitive holders and offer superior wear at a lower price. The “T” shape with three wear surfaces reduces the number of change outs that are required.
In over 40 years there have been no significant developments in skirtboard systems … until now! Simplicity is the only way to describe the EZ Skirt System. With only two components, its construction is maintenance free, vibration proof and the simplest system to install. It is also the only system that can truly be maintained by one technician.
Fusion Combi 65/45/65 is a premium scraper rubber that provides wear life at least 2 times greater than commercial SBR rubber. Produced with the finest natural rubber, Combi 65/45/65 multi layer construction provides long wear life with excellent cleaning capabilities. The hard outside layers provide impact protection while the softer inside layer provides superior cleaning. Fusion Combi will outlast any other scraper rubber.
Fusion Combi 85/55/85 is a premium scraper rubber that provides wear life at least 2 times greater than commercial SBR rubber. Produced with the finest natural rubber, Combi 85/55/85 multi layer construction provides long wear life with excellent cleaning capabilities. The hard outside layers provide impact protection while the softer inside layer provides superior cleaning. Fusion Combi will outlast any other scraper rubber.
Fusion Brush Pads offer a unique solution to cleaning belts with a
profiled surface including those with sidewalls and cleats. They also work very well on cleaning products that are profiled and require deburring.
